2022/12/07

New updated iOS App - "Vibroscope" ver 6.0

icon-vs_v600.png

"Vibroscope" has been updated to version 6.0 today!

"Vibroscope" is a vibration measurement and analysis tools by using the iPhone's acceleration sensor in real-time. It allows you to monitor by visualizing the low-frequency vibration, such as inaudible by ear.

This app can be intuitively detected an acceleration amount, that displays the two-axial coordinates in the horizontal direction and the time-axis waveform in the vertical direction.

It can measure by determining the horizontal or vertical direction to suit the attitude of the iPhone automatically, so as to be available on the floor and desk or handheld.

* Main mode : Vibration measurement and analysis
vs_main_xy_v600.jpg vs_main_2_v600.jpg

vs_main_1_v600.jpg vs_main_log_v600.jpg

In addition, "Vibroscope" is also equipped with the ability to analyze the frequency components of the low-frequency vibration by the FFT analyzer.

* FFT mode
vs_fft_axes_v600.jpg

vs_fft_axis1_v600.jpg vs_fft_axis2_v600.jpg

* Application Examples
- Analysis and evaluation of ride comfort and operation of automobiles and trains
- Analysis and evaluation of acceleration and frequency components of floors and walls caused by traffic, factory noise, etc.
- Vibration measurement of audio equipment, etc.
- Measurement of vibration acceleration during earthquakes, etc.
- Balance test by body sway detection

Detailed information about this app is available on the AppStore and can be found at the following link.

Available_on_the_App_Store_Badge_US-UK_135x40.png
posted by toons at 10:28 | News