New updated iOS App - "Audio Frequency Analyzer" ver 8.0


"Audio Frequency Analyzer" has been updated to version 8.0 today!

"Audio Frequency Analyzer" is a powerful Real-Time Audio Analyzer (RTA) app for iPhone.

It uses our proprietary signal processing technology to analyze incoming audio signals and provides a precision frequency response measurement and spectral visualization.

It is available in a variety of applications, such as sound room tuning, speaker settings, audio equipment testing, stage setting measurement, evaluation of sound mixing environment and Investigation of noise environment.

The latest version is compatible with iOS 16.0 and features a new UI design and improved performance.

Measurement function has two measurement modes, 1/3 octave mode and FFT mode.

In 1/3 octave mode, you can measure the energy average value of each frequency band by frequency division in 1/3 octave x 30 bands. You can analyze spectrum in a specific frequency band, not the instantaneous frequency peak. It is suitable for more quantitative spectrum analysis.

# Frequency response analysis (1/3 Octave mode)

# Frequency response analysis - Display measured value

# Frequency response analysis - Peak hold

In FFT mode, It will perform an instantaneous FFT measurement in all measurement frequency. It can measure the instantaneous frequency peak situations, such as cases where multiple harmonics are generated.

# FFT analysis (FFT mode)

# FFT analysis - Peak hold, Slope OFF

# FFT analysis - Peak hold, Slope ON(3dB/oct、center frequency 1kHz)

Detailed information about this app is available on the AppStore and can be found at the following link.

posted by toons at 10:02 | News